Table of Contents
Advertisement
Figure 73. Installing the liquid cooling module
Next steps
1.
Install the expansion card
2.
Installing the air
shroud.
3. Follow the procedure listed in the
Expansion cards and expansion card risers
NOTE:
A system event entry is logged in the iDRAC Lifecycle Controller if an expansion card riser is not supported
or missing. It does not prevent your system from getting powered on. However, if a F1/F2 pause occurs with an
error message, see Troubleshooting expansion cards section in the Dell PowerEdge Servers Troubleshooting Guide at
www.dell.com/poweredgemanuals.
riser.
After working inside your
system.
Installing and removing system components
111
Advertisement
Table of Contents
