Figure 36. Installing the side wall bracket
Next steps
1.
Install the cooling fan cage
2. If removed,
install the air
3. If removed,
install the drive backplane
4. Follow the procedure listed in the
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
assembly.
shroud.
cover.
After working inside your
Safety
instructions.
bezel.
system.
Installing and removing system components
75