● AMP 90871-1 hand-crimping tool or equivalent
● Tyco Electronics 58433-3 or equivalent
● Wire-stripper pliers to remove insulation from size 10 AWG solid or stranded, insulated copper wire
NOTE:
Use alpha wire part number 3080 or equivalent (65/30 stranding).
Optional front bezel
Removing the front bezel
Prerequisites
1. Follow the safety guidelines listed in
2. Keep the bezel key handy.
Steps
1. If locked, unlock the bezel.
2. Press the release button, and remove the left end of the bezel.
3. Unhook the right end of the bezel, and remove the bezel.
Figure 21. Removing the front bezel
Next steps
Installing the front
bezel.
Installing the front bezel
Prerequisites
1. Follow the safety guidelines listed in
2. Locate and remove the bezel key.
Safety
instructions.
Safety
instructions.
Installing and removing system components
61