Troubleshooting - Thermador Professional Pro Harmony Series Use And Care Manual

Induction ranges
Hide thumbs Also See for Professional Pro Harmony Series:
Table of Contents

Advertisement

Available languages

Available languages

11 Troubleshooting
Tr oubl e s hoot i n g
You can eliminate minor issues on your appliance
Tr oubl e s hoot i n g
yourself. Please read the information on eliminating issues
before contacting Customer Service. This may avoid
unnecessary repair visits.
WARNING
Improper repairs are dangerous.
Only authorized service providers should repair the
appliance.
Only original spare parts may be used to repair the
appliance.
11.1 Oven troubleshooting
Issue
Oven door is locked and will not
open, even after cooling
Oven is not heating
Baking results are not as expected The rack position is not ideal
Food takes longer to cook than
expected
Food is overcooked
Oven light is not working properly
Oven light does not turn off
Cannot remove lens cover on light There is soil build-up around the lens cover
Cause and troubleshooting
The door lock is engaged
Turn the oven off at the circuit breaker and wait five minutes.
1.
Turn breaker back on.
2.
The oven should reset itself and will be operable.
a
There is no power supply to the appliance
Check circuit breaker or fuse box to your house.
1.
Make sure there is proper electrical power to the oven.
2.
There is no cooking temperature set
Set a heating mode temperature.
Refer to the cooking charts for the recommended rack position.
1.
Check "Getting the most out of your appliance" for tips and suggestions.
2.
The oven temperature needs to be recalibrated
Note: The oven is carefully calibrated to provide accurate results.
If food is consistently too brown or too light the temperature can be offset.
→  "Oven temperature offset", Page 25
The oven temperature needs to be recalibrated
Note: The oven is carefully calibrated to provide accurate results.
If food is consistently too brown or too light the temperature can be offset.
→  "Oven temperature offset", Page 25
The oven light bulb is loose or burnt out
Replace or reinsert the light bulb.
→  "Replacing an oven light bulb", Page 49
Tip: Touching the bulb with fingers may cause the bulb to burn out.
The oven door does not close properly
Check the oven door for obstructions.
1.
Check to see if the hinge is bent.
2.
The oven light is turned on
Press the oven light button to turn the oven light off.
Let the oven cavity cool off.
1.
Wipe the lens cover area with a clean, dry towel, then try to remove the lens
2.
cover.
If the appliance has an issue, call Customer Service.
WARNING
The cooktop switches off automatically and can no longer
be operated. It may switch on unintentionally at a later
point.
Switch off the circuit breaker or fuse in the electrical
panel.
Call Customer Service.
Troubleshooting en-us
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pri30lbhuPri30lbhcPri36lbhuPri36lbhc

Table of Contents