Home Connect® Settings - Thermador Professional Pro Harmony Series Use And Care Manual

Download the Home Connect® app.
1.
Open the Home Connect® app and scan the following
2.
QR code.
Pairing the cooktop
Overview of the cooktop Home Connect® settings
The following Home Connect® settings are available in the basic settings menu of the cooktop.
Setting Selection or display
⁠ – Not connected/disconnect network
– Connect automatically
– Connect manually
– Connected
⁠ – Not connected
– Connect
⁠ – Wireless module switched off
– Wireless module switched on
⁠ – Switched off
– Switched on
⁠ – Update available and ready for
installation
– Start installation starten
⁠ – Not authorized
– Authorized
Factory setting
1
1
Pairing the oven
Follow the instructions in the Home Connect® app.
3.
9.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
Description and additional information
Log the cooktop on in the home network (Wi-Fi) or
disconnect from the network.
Connecting to the app
The setting is only displayed if the cooktop is connected to
the home network.
Connection to the (Wi-Fi)
If (Wi-Fi) has been activated, you can use the
Home Connect® functions.
In networked standby mode, your cooktop requires a
maximum of 2 W.
The setting is only displayed if the cooktop has been
previously connected to a network.
Set using the app
If the setting is switched off, only the cooktop's operating
statuses will be displayed in the Home Connect® app.
Software update
The setting is only displayed if a software update is
available.
Controlling remote access by Customer Support
The setting is only displayed if after-sales service is
attempting to connect to the cooktop. You can end this at
any time after granting access.
Home Connect® en-us
43