Kitchen Timer; Stopwatch; Powerboost - Thermador Professional Pro Harmony Series Use And Care Manual

The flexible cooking zone is activated as a joined
a
cooking zone.
The power level in the area in which the cookware is
a
located lights up in the cooking zone display.
Changing the power level for HeatShift®
You can change the power levels for the individual
cooking areas during the cooking process.
Set the cookware down on the cooking area.
1.
Change the power level in the settings area.
2.
Only the power level for the cooking area on which the
a
cookware is located is changed.
Deactivating HeatShift®
Press HEAT SHIFT.
▶
The indicator above HEAT SHIFT goes out.
a
Notes
If you set one of the cooking areas to , the function is
¡
deactivated after a few seconds.
When the function is deactivated, the power levels for
¡
the three cooking areas are reset to the preset values.
8.7 Kitchen timer
You can use the Kitchen timer to set a time of up to
99 minutes.
The Kitchen timer is independent from other settings and
does not switch off a cooking zone.
You can also use the Kitchen timer when the cooktop is
turned off or the panel lock is activated.
Setting the Kitchen timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press KITCHEN TIMER.
1.
lights up in the timer display.
a
The indicator above KITCHEN TIMER lights up.
a
Set the desired time in the settings area.
2.
Press KITCHEN TIMER to confirm.
3.
The time starts to count down after a few seconds.
a
When the time has elapsed, a beep sounds.
a
the timer display.
The indicator above KITCHEN TIMER blinks.
a
Press any key to turn off the signals. After 10 seconds
4.
the signals stop automatically.
Changing or canceling the kitchen timer
Press KITCHEN TIMER.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
8.8 Stopwatch
The Stopwatch displays the time that has elapsed since
activating the function.
The Stopwatch works independently from the cooking
zones and from other settings. This function does not
automatically switch off a cooking zone.
Starting the Stopwatch
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press STOP WATCH.
▶
lights up on the timer display.
a
The indicator above STOP WATCH lights up.
a
The timer starts to count up.
a
Canceling the Stopwatch
Press STOP WATCH.
1.
The timer stops running.
a
Press STOP WATCH again.
2.
The timer is cleared and turns off.
a
8.9 PowerBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily
increases the top output of the selected cooking zone.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Restrictions for using the PowerBoost® function
This function can only be used on one cooking zone of
¡
the same cooktop segment at a time. In the illustration
these segments are displayed in different colors.
If the function is not available,
¡
display of the selected cooking zone. The power level
is set automatically.
30" appliances
blinks in
Cooktop operation en-us
and blink on the
33