Changing The Settings Via The Home Connect® App; Remote Start - Oven Cavity Feature - Thermador Professional Pro Harmony Series Use And Care Manual

en-us Home Connect®
Setting Selection or display
⁠ – Not connected to the home network
(Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
⁠ – Not connected
– Connected
Factory setting
1
Overview of the oven Home Connect® settings
The following Home Connect® settings are available in the basic settings menu of the oven.
Basic setting Options
Wi-Fi On
¡
Off
¡
Network Connect to network
¡
Disconnect from network
¡
Connect to app -
Remote control On
¡
Off
¡
Oven -
information
9.3 Changing the settings via the
Home Connect® app
You can use the Home Connect® app to change the
appliance settings and send them to the appliance.
Prerequisits for using the Home Connect®:
The appliance is connected to the home network and to
¡
the Home Connect® app.
In order to set the appliance via the app,
¡
Home Connect® must be activated in the basic settings.
– Activate in the cooktop basic settings.
– Activate Home Connect ON in the oven basic
settings.
The oven or cooktop must be turned on.
¡
Changing the cooktop settings
Select the setting in the Home Connect® app and send
1.
it to the cooktop. Follow the instructions in the
Home Connect® app.
If the setting was previously , two steps are required:
2.
If CONFIRM flashes, touch CONFIRM.
‒
If the cooking zone display alternately flashes the old
‒
and new value, select the cooking zone.
44
Description and additional information
Display Wi-Fi signal strength
The setting is only displayed if there is a connection to the
home network (Wi-Fi).
Connection to Home Connect® server
The setting is only displayed if there is a connection to the
home network (Wi-Fi).
Description and additional information
If (Wi-Fi) is activated, you can use Home Connect®.
In networked standby mode, the oven requires a maximum
of 2 W.
If you disconnect the oven from the network, all network
information will be deleted. This setting is useful if you have
new login details for the router.
This setting initiates the connection between the
Home Connect® app and the oven.
When this function is deactivated, you can only view the
operating status of the oven in the app.
When this function is activated, you can remotely start and
control the oven.
The display shows information about the network or the
oven.
If the setting was not previously , the old and new
3.
value alternately flash directly on the cooking zone
display.
To accept the setting for the cooking zone, select the
‒
cooking zone.
To discard the setting, touch any other touch key on the
4.
cooktop.
Changing the oven settings
Select the setting in the Home Connect® app and send
▶
it to the oven. Follow the instructions in the
Home Connect® app.
9.4 Remote start - oven cavity feature
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
Do not store any flammable materials or temperature
▶
sensitive items inside, on top or near surface units of
the appliance.