Flexplus Cooking Zone (Only For 30" Appliances) - Thermador Professional Pro Harmony Series Use And Care Manual

Flexible cooking zone as two separate cooking zones
Possible Explanation
cookware
positions
The front and rear cooking zones each
have two induction elements. They can
be used independently of each other.
Use only one item of cookware on each
cooking zone.
Select the required heat setting for
each of the cooking zones.
Middle cooking zone (only for 36" appliances)
Possible Explanation
cookware
positions
The cookware diameter is smaller than
or equal to 5⅛" (13 cm).
Place the cookware on one of the three
positions shown in the illustration.
The cookware diameter is larger than
5⅛" (13 cm).
Place the cookware on one of the two
positions shown in the illustration.
The cookware takes up more than one
of the positions shown above.
Position the cookware starting on the
upper or lower edge of the flexible
cooking zone.
Restrictions
Not possible Explanation
cookware
position
Position the cookware so that is covers
only one of the flexible cooking zones.
Otherwise, the cooking zones will not
be activated as intended and the
cooking result will not be satisfactory.
Using the flexible zone as two separate cooking
zones
Make the settings for each cooking zone independently.
▶
→ "Cooking zone settings", Page 29
Note: The flexible cooking zone operates as two separate
cooking zones as a default. If you want the Liberty®
function to be activated automatically you can adjust the
basic settings.
Activating the Liberty® function
Place the cookware on the flexible cooking zone.
1.
Select one of the two cooking zones that belong to the
2.
flexible cooking zone.
Press JOIN I SPLIT.
3.
lights up.
a
Set the power level.
4.
The power level is displayed on both cooking zone
a
displays.
Note: If both cooking zones are set to different power
levels before being linked, both cooking zones switch to 0.
Changing the power level for the flexible cooking
zone
Select one of the two cooking zones of the flexible
1.
cooking zone.
Change the power level in the settings area.
2.
Adding cookware to the flexible cooking zone
You can add a piece of cookware while you are cooking
on the flexible cooking zone.
Place the additional piece of cookware on the flexible
1.
cooking zone.
Select one of the two cooking zones of the flexible
2.
cooking zone.
Press JOIN I SPLIT twice.
3.
The additional cookware is detected.
a
The power level stays the same.
a
Note: If you remove the cookware from the cooking zone,
or lift it up, the cooking zone begins to search for the
cookware. The power level stays the same.
Deactivating the Liberty® function
Select one of the two cooking zones of the flexible
1.
cooking zone.
Press JOIN I SPLIT.
2.
The flexible cooking zone is split into two separate
a
cooking zones.
Note: If the cooking zone is switched off, and then
switched back on again later, the flexible cooking zone is
reset to function as two independent cooking zones.
8.5 FlexPlus cooking zone
(only for 30" appliances)
The cooktop has two FlexPlus cooking zones which are
located between the two flexible cooking zones. They
work in conjunction with the right or left flexible cooking
zone. This means that larger cookware can be used and
better cooking results can be achieved.
Each of the two FlexPlus cooking zones can be activated
in conjunction with either the right or the left flexible
cooking zone. You cannot activate the FlexPlus cooking
zones on their own.
Information on using the cookware
For good thermal detection and heat distribution, position
the cookware in the centre. Make sure that the cookware
covers the side cooking zone and the FlexPlus cooking
zone.
Cooktop operation en-us
31