Cooking Zone Settings - Thermador Professional Pro Harmony Series Use And Care Manual

time you turn on the cooktop, until you connect the
cooktop to your home network, or if the connection
has been interrupted.
Press and follow the instructions for
‒
Home Connect™ setup.
To exit the initial set-up, press any touch key.
‒
The indicator above ON I OFF turns on.
a
The symbols for the cooking zones and functions
a
available at this time light up.
⁠ . lights up in the cooking zone displays.
a
Turning the cooktop off
Press and hold ON I OFF until all indicators go out.
▶
All cooking zones are turned off.
a
The residual heat indicators remain lit until the cooking
a
zones have cooled off sufficiently.
Note: The cooktop turns off automatically when all the
cooking zones have been turned off for more than
20 seconds.
8.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting Power level
lowest power level
highest power level
Intermediate setting for all power levels
Note: The cooktop may temporarily reduce the power
automatically to protect the fragile parts of your appliance
and to prevent the appliance from producing excess noise.
Setting the power level
Requirement: The cooktop is turned on.
Place the cookware on the cooking zone.
1.
Press to select the cooking zone
2.
⁠ . lights up brighter on the cooking zone display.
a
Set the power level in the settings area
3.
set an intermediate level, for example 1.5 or 3.5.
Notes
¡
¡
¡
¡
¡
Changing the power level
1.
2.
Turning the cooking zone off
1.
2.
a
Note: You can also switch off the cooking zone directly by
touching the cooking zone symbol for longer than
3 seconds.
Recommended cooking settings
Here you can find recommendations on cooking and an
overview of various dishes with suitable heat levels.
¡
⁠ .
¡
¡
. Press to
¡
¡
¡
¡
¡
¡
If there is no cookware on the cooking zone, the
cooking zone display blinks. This means that the
cooking zone tries to detect the cookware. Place
cookware on the cooking zone within 30 seconds, or the
cooking zone will switch itself off.
If the indicators blink while cookware is present on the
cooking zone, check whether the cookware is suitable
for induction cooking.
If there is cookware on the cooking zone before
switching the cooktop on, it is detected within
20 seconds after touching the main switch and the
cooking zone is selected automatically. Set the power
level within 10 seconds. Otherwise, the cooking zone
switches off after 20 seconds.
If there are several pieces of cookware on the cooktop
when it is switched on, only one piece of cookware is
detected.
Place cookware on the flexible cooking zone in the
correct position according to size.
Select the desired cooking zone.
Set the power level in the settings area.
Select the desired cooking zone.
Select in the settings area.
The residual heat indicator lights up after approximately
10 seconds.
Select power level 8 or 9 for bringing water to a boil or
heating up the pan.
Stir thick liquids occasionally.
Food that needs to be seared quickly, or food which
loses a lot of liquid during initial frying, is best seared in
several small portions.
When you cook with a lid on, turn the heat setting down
as soon as steam escapes between lid and cookware.
Keep the lid on the cookware after cooking until you
serve the food.
When you cook with a pressure cooker, observe the
manufacturer's instructions.
Do not cook food for too long or in too much water.
Otherwise the nutrients will be lost. You can use the
kitchen timer to set the optimum cooking time.
→ "Kitchen timer", Page 33
Do not heat oil or grease until it smokes. You will
achieve healthier cooking results.
When you brown food, fry small portions one after the
other.
Cooktop operation en-us
29