Thermador Professional Pro Harmony Series Use And Care Manual page 49

The oven heats up to a very high temperature during self
cleaning. Opening the door can result in injury.
When self-cleaning, confirm that the door locks and will
▶
not open.
If the door does not lock, do not run Self Clean. Contact
▶
Customer Service.
CAUTION
Remove broiler pans, pots, and other utensils and excess
spillage before self-cleaning.
Do not leave food or cooking utensils, etc., in the oven
during the pyrolytic self-cleaning mode of operation.
CAUTION
The oven vents are important for air circulation. Covering
the oven vents will cause the oven to overheat. Refer to
the appliance overview for the location of the oven vents.
→ "Appliance", Page 12 → "Appliance", Page 12
Do not obstruct oven vents.
▶
NOTICE:
Do not clean parts or accessories with the self clean
function.
Wipe out excessive spillage from the oven cavity.
▶
Starting self clean
Requirements
All heating modes or timers are canceled.
¡
You have carried out the steps for preparing the oven
¡
for self clean.
→ "Preparing self clean", Page 48
Turn the mode selection knob to SELF CLEAN.
1.
Turn the temperature selection knob to CLEAN.
2.
Press the right or to select the clean level.
3.
Soil level
Low
High
Press ENTER.
4.
An information text appears.
a
Press ENTER.
5.
Within 20 seconds the door locks and
a
Check if the door is locked.
6.
Note: Do not use self clean if the oven door does not
lock.
Setting an end timer for self clean
Turn the mode selection knob to SELF CLEAN.
1.
Turn the temperature selection knob to CLEAN.
2.
Press the right or to select the clean level.
3.
Press ENTER.
4.
Press TIMERS.
5.
Press the left or to select "End Time".
6.
Press the right or to set an end time.
7.
Press ENTER.
8.
Duration (excluding cool off)
1½ hours
3 hours
appears.
After the information text, press ENTER.
9.
Completing self clean
When self clean is finished, the oven cools down. The
door latch will open automatically when the oven is below
500°F (260°C).
CAUTION
To avoid risk of burns, let the oven cool down completely
before opening the oven door. The oven cavity is still at
baking temperatures when the door latch is released after
self clean.
Turn the mode selection knob and the temperature
1.
selection knob to OFF.
Wipe the remaining ash from the oven with a moist
2.
cloth.
Note: After self clean is complete, the self clean function
will be prevented from running again for a period of
24 hours.
Maintenance
Replacing an oven light bulb
When the oven light fails you can replace the light bulbs.
WARNING
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Light bulb specifications
Refer to this chart for information on the light bulb you
have to use for your oven model.
Bulb description
25 Watt, halogen bulb,
G9 base, 120 Volts
Replacing an oven light
Note: The graphics are representative. Your appliance
may have different graphic appearances.
Cleaning and maintenance en-us
Bulb image
49