Panboost; Movemode - Thermador Professional Pro Harmony Series Use And Care Manual

en-us Cooktop operation
36" appliances
Activating PowerBoost®
Select the desired cooking zone.
1.
Touch POWER BOOST.
2.
lights up in the cooking zone display.
a
Deactivating PowerBoost®
Select the desired cooking zone.
1.
Press POWER BOOST.
2.
goes out.
a
The cooking zone switches to power level ⁠ .
a
Notes
In certain circumstances, this function may switch off
¡
automatically in order to protect the electronic elements
inside the cooktop.
If you have set a power level before activating the
¡
function, this power level is used automatically after the
function has been deactivated.
8.10 PanBoost®
With this function you can heat cookware faster than with
power level ⁠ .
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
Always use cookware that has not been pre-heated.
¡
Use cookware with a flat base.
¡
Do not use cookware with a thin base.
¡
Never leave empty cookware, oil, butter or lard to heat
¡
up unattended.
Do not place a lid on the cookware.
¡
Place the cookware on the center of the cooking zone.
¡
Ensure that the diameter of the base of the cookware
¡
matches the size of the cooking zone.
Refer to the information on cooking with induction for
¡
information on the type, size and positioning of the
cookware.
Restrictions for using the PanBoost® function
This function can only be used on one cooking zone of
¡
the same cooktop segment at a time. In the illustration
these segments are displayed in different colors.
If the function is not available,
¡
display of the selected cooking zone. The power level
is set automatically.
34
and blink on the
30" appliances
36" appliances
Activating PanBoost®
WARNING
Oil and fat heat up quickly with the PanBoost® function.
Overheated oil and fat may ignite.
Never leave the cooktop unattended during cooking.
▶
Select the desired cooking zone.
1.
Press POWER BOOST twice.
2.
⁠ . lights up on the cooking zone display.
a
Deactivating PanBoost®
The function is turned off automatically after 30 seconds.
You can turn it off manually before that.
Select the desired cooking zone.
1.
Press POWER BOOST.
2.
⁠ . goes out.
a
The cooking zone switches to power level ⁠ .
a
8.11 MoveMode®
You can use this function to transfer the settings from one
cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone you are using to another cooking zone.
You can also use this function on the flexible cooking
zone. For additional information on how to position the
cookware, refer to the information on using the flexible
cooking zone.
→ "Liberty® cooking zone", Page 30
General information for using this function:
Ensure that the new cooking zone is turned off, does
¡
not have any settings and there is no cookware on it.
If you move several pieces of cookware, only the
¡
settings for the cookware you moved last are
transferred.