Thermador Professional Pro Harmony Series Use And Care Manual page 41

Note: The appliances can only be connected when both
are connected to the home network and are
simultaneously engaged in connecting. If the time allowed
for connecting has already expired for one of the two
appliances, start the connection process again.
Requirements
Your router has a WPS button. You will find information
¡
about this in the manual for your router.
The hood is connected to the same home network (Wi-
¡
Fi).
Turn on the cooktop.
1.
Press and hold KITCHEN TIMER for 4 seconds.
2.
The product information is displayed.
a
Press KITCHEN TIMER repeatedly until
3.
displayed alternately.
(not connected) or
a
lights up on the cooking zone display.
Select the settings value in the settings area.
4.
is blinking on the cooking zone display.
a
If the appliance is not yet connected to your home
5.
network, press the WPS button on the router within the
next 2 minutes.
The cooktop is connected to your home network.
a
lights up on the cooking zone display.
Initiate the connection process on the hood within the
6.
next 2 minutes.
When the connection is completed
a
cooking zone display.
The hood control icons light up on the control panel.
a
Resetting the connection
If you have problems connecting your appliance to your
home network (Wi-Fi) or if you want to log your appliance
onto a different home network (Wi-Fi) , you can reset the
Home Connect™ settings.
Note: If you reset the Home Connect® settings, the
connection to any hood will also be terminated.
Turn on the cooktop.
1.
Overview of the hood control settings
You can adjust the cooktop based hood controls to suit your requirements at any time.
Note: The settings will only be displayed if the appliance is connected to a hood. Some of these settings may not be
available.
Setting Values
- Not connected
¡
- Start connection process
¡
- Connected to home network
¡
(Wi-Fi)
- Connected to hood
¡
Factory setting (may vary according to model)
1
and
(connected to home network)
lights up on the
Description
/disconnect Connection between cooktop and hood
1
Press and hold KITCHEN TIMER for 4 seconds.
2.
The product information is displayed.
a
Press KITCHEN TIMER repeatedly until
3.
displayed alternately.
Set the settings value to
4.
Controlling the hood via the cooktop
In the basic settings menu, you can configure what the
hood should do when the cooktop or individual cooking
zones are switched on or off.
You can select other settings using the control panel.
Setting the fan
Touch HOOD SYNC.
1.
are
Select the fan level.
2.
You can choose between the levels 1, 2 and 3. To
select the levels Boost and PowerBoost, press 4 or 5 in
the settings area, or press POWER BOOST repeatedly
until the required intensive level is set.
Turning off the fan
Touch KITCHEN TIMER.
1.
Select fan setting ⁠ .
2.
Setting automatic mode
Touch HOOD SYNC repeatedly until
▶
Depending on the configuration of the hood sensor, the
a
fan will start automatically when steam is produced.
Refer to the operating instructions of your hood.
Deactivating automatic mode
Touch HOOD SYNC repeatedly until
▶
Select a different fan setting.
Setting the hood lighting
You can switch the hood light on and off via the control
panel of the cooktop.
Press LIGHT.
▶
Note: Depending on the basic settings you have selected,
the light will automatically be switched on or off when the
cooktop is switched on or off.
Cooktop operation en-us
and are
in the settings area.
lights up.
goes out or
41