Rack Positions; Safe Use Of Oven Racks; Inserting The Wire Rack; Inserting The Telescopic Rack - Thermador Professional Pro Harmony Series Use And Care Manual

en-us Accessories
5.3 Rack positions
Your oven has 5 rack positions. The rack positions are
counted from bottom to top.
Use rack positions 1 through 5 only. DO NOT attempt to
use the top guide to support an oven rack, it may tip.
Refer to our recommendations for selecting the suitable
rack position.
5.4 Safe use of oven racks
For your safety, follow these recommendations on how to
use the oven racks correctly.
CAUTION
To avoid possible injury or damage to the appliance,
ensure oven rack is installed exactly per installation
instructions and not backwards or upside down.
Do not slide any accessories between the rack positions,
or they may tip.
5.5 Inserting the wire rack
The wire rack can be used in the conventional oven on
level 1 to 5.
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 20 .
Grasp the rack firmly on both sides.
1.
20
Tilt the rack up to allow the stop into rack guide.
2.
Bring the rack to a horizontal position and push it in the
3.
rest of the way.
The rack should be straight and flat, not crooked.
5.6 Inserting the telescopic rack
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 20 .
Hold the telescopic rack at a slight angle and engage
1.
the rear hooks in the oven rails on both sides of the
oven cavity.
Hold the rack straight to allow the second tab to rest
2.
over the oven rail.