Home Connect; Setting Up Home Connect - Thermador Professional Pro Harmony Series Use And Care Manual

en-us Home Connect®
Setting Values
- Deactivated
¡
The hood must be switched on
manually, if required.
- Switched on in automatic
¡
mode.
1
In automatic mode, the hood
switches itself on when one of
the cooking zones is switched
on.
- Switched on in manual
¡
mode.
The hood switches itself on at
the default level when one of the
cooking zones is switched on.
- Deactivated
¡
The fan switches off when the
cooktop is turned off.
- Switched on in automatic
¡
mode
1
- Switched on with standard
¡
delayd shut-off
- No change to the settings
¡
- Turned off
¡
- Turned on
¡
The light turns on automatically
when you turn on the cooktop.
- Turned off
¡
- Turned on
¡
The light turns off automatically
when you turn off the cooktop.
Factory setting (may vary according to model)
1
9 Home Connect®
Hom e C onne c t ®
This appliance may be network-capable. Connecting your
Hom e C onne c t ®
appliance to a mobile device lets you control its functions
via the Home Connect® app, adjust its basic settings and
monitor its operating status.
The Home Connect® services are not available in every
country. The availability of the Home Connect® function
depends on the availability of Home Connect® services in
your country. You can find information on this at:
www.home-connect.com.
The Home Connect® app guides you through the entire
registration process. Follow the instructions in the
Home Connect® app to implement the settings.
Tips
Consult the Home Connect® documents supplied.
¡
Follow the instructions in the Home Connect® app as
¡
well.
Notes
Also note the safety information in this instruction
¡
manual and ensure that it is also observed when
operating the appliance using the Home Connect® app.
Cooktops are not designed to be left unattended.
¡
Always monitor the cooking process.
42
Description
Automatic fan switch-on
The display shows this setting only when the appliance has been
connected to the hood.
Delay shut-off
Setting for whether/how the fan is to run on after the cooktop is turned
off.
The display shows this setting only when the appliance has been
connected to the hood.
Turn light on automatically
The display shows this setting only when the appliance has been
1
connected to the hood.
Turn off the light automatically
1
Operating the appliance on the appliance itself always
¡
takes priority. It is not possible to operate the appliance
using the Home Connect® app during this time.
In networked standby mode, the appliance requires a
¡
maximum of 2 watts.
9.1 Setting up Home Connect®
Your appliance is equipped with two separate
Home Connect® modules, one for the oven cavity and one
for the cooktop. Carry out the Home Connect® pairing
process for both components separately.
Requirements
The appliance is connected to the power supply and is
¡
switched on.
You have a mobile device with a current version of the
¡
iOS or Android operating system, e.g. a smartphone.
The mobile device and the appliance are within range of
¡
your home network's Wi-Fi signal.