Thermador Professional Pro Harmony Series Use And Care Manual page 50

en-us Cleaning and maintenance
Requirements
Refer to the oven light bulb chart for the oven light
¡
specification of your oven.
Follow the safety instructions on replacing a light bulb.
¡
→ Page 49
Turn off the power to the oven at the main power supply
1.
(fuse or breaker box).
Remove the oven racks.
2.
Slide the tip of a flat blade screw driver between the
3.
holder clip and the lamp housing.
1
Support the glass lens cover with fingers along the
4.
bottom edge to prevent the cover from falling to the
bottom of the oven. Gently twist the flat blade screw
driver to loosen the glass lens cover
Remove the glass lens cover.
5.
Remove the bulb by grasping and sliding the bulb
6.
straight back until the two prongs have cleared the
ceramic holder
DO NOT touch the glass of the new replacement bulb
7.
with your fingers. It may cause the bulb to fail when it
first lights. Grasp the replacement bulb with a clean dry
cloth. Locate the two prongs in the ceramic holder,
gently poking until the two prongs locate in the ceramic
socket ⁠ .
4
Press down to seat the bulb.
8.
50
2
⁠ .
3
Slide the protective lens into the holder clip and push
9.
the other end until the fixing clip snaps back into the
housing ⁠ .
Turn on the circuit breaker.
10.