Epson Stylus Pro 10000 Service Manual page 245

EPSON Stylus Pro 10000/10000CF/10600
1
2
Gap 300, V2, M 0
Item
SelecType
Gap 300, V2, LC 0
SelecType Item
Gap 300, V2, LM 0
Item
SelecType
Gap 300, V2, Y 0
Item
SelecType
Gap End
SelecType
Item
Figure 5-63.
When press the "Enter" key during the "Gap End" display, operation mode shift to
the "Adj:Feed Adj".
Print all of the test pattern when "Enter" key is pressed during the "[Enter] Adjust
Print" display.
Print the related pattern when press the "Enter" key after the value change.
Adjustment
Thank You For Using TheServiceManualShop.com
3 4
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Thank You For Using TheServiceManualShop.com
Difference of maximum and minimum correction value are within 64/1440 inch
with six colors.
<Print pattern>
Self-Diagnostics
Figure 5-64.
Revision D
238