Top And Bottom Adjustment - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.13 Top and Bottom adjustment

Perform the printing and form cut then input the distance of front sensor-head, cutter-
head, edge sensor 0-head (print beginning position) in order to adjust the top, bottom
and side margin. Figure 5-67 showing menu sequence and Figure 5-68 showing print
pattern.
Printing Pattern
Top Length : 3.0mm
SelecType
Item
Bottom Length : 14.0mm
SelecType Item
Side Margin : 3.0mm
SelecType Item
Figure 5-67.
Shift to the "Top and Bottom" menu by pressing the "Pause" key during the input
screen display.
Shift to the "Bottom length" or "Side margin "menu by pressing the "Enter" at the
input screen of "Top length "k or "Bottom length".
Shift to the "RearSen.Pos.: xxmm" menu by pressing "Enter" key during the input
screen of "Side margin".
Adjustment
Thank You For Using TheServiceManualShop.com
Adjustable with "Paper Feed +/
-" key at unit of 0.1 mm.
Adjustable with "Paper Feed +/
-" key at unit of 0.1 mm.
Adjustable with "Paper Feed +/
-" key at unit of 0.1 mm.
Thank You For Using TheServiceManualShop.com
Self-Diagnostics
Front: Correction pattern for cutter-head length.
Adjustment item: Top margin (Front sensor position) /Bottom margin (Cutter position)
/Side margin (print beginning position)
Printing method: Uni-d one pass with black color at 180dpi resolution.
Bottom length
Top length
Figure 5-68.
Revision D
Paper
Feed
Side margin
240