Epson Stylus Pro 10000 Service Manual page 160

EPSON Stylus Pro 10000/10000CF/10600
10. Remove the screw of the upper side while holding down the Compression Spring
that is attached to the screw of the lower part with the finger such that the spring of
the hinge does not miss and not jump out, then remove the hinge, Compression
Spring and holder. Also remove the hinge on the right side.
Figure 4-87.
Compression spring
Hinge L
Figure 4-88.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
Spring holder Hinge R
Screw (lower side)
Thank You For Using TheServiceManualShop.com
11. Remove two screws securing the Printhead to the Head guide of the right and left.
Disassembly
Revision D
Figure 4-89.
153