Epson Stylus Pro 10000 Service Manual page 53

EPSON Stylus Pro 10000/10000CF/10600
Table 1-44. Maintenance Mode 1 Setup Items
Item
Print hexadecimal dump
Panel display language select
Parallel interface mode
Set IEEE1284.4
Set MW7 Mode
Set selectable MW2 Mode
Auto nozzle check AUTO NOZZLE CHK.
Ink information (K) K CARTRIDGE INFO
Ink information (C) C CARTRIDGE INFO
Ink information (M) M CARTRIDGE INFO
Ink information (Lc) Lc CARTRIDGE INFO
Ink information (Lm) Lm CARTRIDGE INFO
Ink information (Y) Y CARTRIDGE INFO
Gap adjustment menu 2 HEAD ALIGNMENT MENU 2
Supersonic cleaning
Paper feed adjustment mode table1
(Pigment, PH=less than 0.1mm)
Paper feed adjustment mode table2
(Pigment, PH=less than 0.2mm)
Paper feed adjustment mode table3
(Dye, PH=less than 0.1mm)
Paper feed adjustment mode table4
(Dye, PH=less than 0.2mm)
Paper feed adjustment mode table5
(Dye/Pigment, PH=less than 0.5mm)
Paper feed adjustment offset 1
(Pigment)
Paper feed adjustment offset 2 (Dye)
System table version XXS=<mmmmm><n>
User table version
NOTE: (*1) When hexadecimal dump mode is executed, "HEX MODE" is displayed.
Product Description
Thank You For Using TheServiceManualShop.com
Panel display Setup value
PRINT *1
HEX DUMP
ENGLISH, FRENCH, ITALIAN,
LANGUAGE GERMAN, SPANISH,
PORTUGUE
PARA. I/F ECP, COMPAT
ON, OFF
IEEE1284.4
MW7 A, B, C
1, 2, 3, 4, 5, 6
MW2 SELECT
ON, OFF
(Ink information menu)
(Ink information menu)
(Ink information menu)
(Ink information menu)
(Ink information menu)
(Ink information menu)
SSCL B/C EXEC
EXEC
SSCL LC/LM
SSCL M/Y EXEC
<nn>:00H-C9H
XX1=<nn>:<mm>
<mm>:00H-C9H, FFH
<nn>:00H-C9H
XX2=<nn>:<mm>
<mm>:00H-C9H, FFH
<nn>:00H-C9H
XX3=<nn>:<mm>
<mm>:00H-C9H, FFH
<nn>:00H-C9H
XX4=<nn>:<mm>
<mm>:00H-C9H, FFH
<nn>:00H-C9H
XX5=<nn>:<mm>
<mm>:00H-C9H, FFH
<nn>:-32 - 0 - + 32
XXO=<nn>
<nn>:-32 - 0 - + 32
XXP=<nn>
<mmmmm>: EG F/W version
<nn>: 01H - FFH
XXU=<nn>
Thank You For Using TheServiceManualShop.com
HEXADECIMAL DUMP
The hex dump function allows data sent to the printer to be printed and displayed in
hexadecimal format.
One line contains 16 data items in hexadecimal format, with the equivalent characters
printed at the right of each line.
If no equipment characters exist (eg control codes) a full stop is printed.
Each 16 data items is printed, and if the last line contains less than 16 data items, this
line is printed by pressing the Pause button.
SelecType is not possible in the hex dump mode.
The use of this function allows the user to check that data has been sent correctly from
the computer to the printer.
This mode is terminated by switching power OFF.
PANEL DISPLAY LANGUAGE SELECT
Selecting this mode allows the user to select English, French, Italian, German, Spanish,
Portuguese for display on the LCD.
M/W7 MODE SELECT
Followings can be selected for 360X720dpi M/W printing mode pattern.
A:
Uni-D: Head 1/4 feeding
Bi-D: Head 1/2 feeding
B:
Uni-d/Bi-d: Head 1/4 feeding
C:
Uni-d/Bi-d: MW (Stylus Pro 7000/9000 same mode)
Maintenance Mode 1
Revision D
46