Maintenance Mode 1; Outline - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

1.7 Maintenance Mode 1

1.7.1 Outline

The following explanations regarding operating Panel service
C A U T I O N
functions are for service and support purposes only; do not share
this information with the user.
It is recommended that the Paper Release Lever be released before
C H E C K
P O I N T starting the Maintenance Mode 1. Doing this will prevent the
printer from entering initialization actions and allow operations to
be performed smoothly.
Product Description
Thank You For Using TheServiceManualShop.com
Startup
1. The maintenance mode display is selected by switching power ON while pressing
the Pause button.
Operation
1. The Setup items select mode is selected by pressing the Item button once. The first
Setup item on the Setup menu is displayed. The display is in the '[Item]=[current
setup value]*' format. The '*' represents the current setup value.
2. The Setup items are displayed in the '[Item]=[current setup value]*' format in turn
each time the Item button is pressed.
3. With the Setup items displayed, the settable values are displayed in turn in the
'[Item]=[current setup value](*)' format each time the setup value + button or
setup value - button is pressed. The '*' is only displayed when the displayed setup
value is the current value. The values are displayed in reverse order by pressing the
setup value - button. If the setup value + button or setup value - button is pressed
for more than the set period of time, the setup values are displayed periodically in
forward or reverse order respectively. The cursor moves among column separated
by ":" character (ie:"XX1=<nn>:<mm>") if the cleaning button is pushed.
4. When the Enter button is pressed, the displayed setup value is entered and
recorded as the current setup value, and any associated operations are run. No
operation occurs if '*' is already displayed.
5. When the Item button is pressed in the Setup item select mode, the system returns
to the maintenance mode 1.
Termination
1. The printer is ready for printing following reset after selecting the panel display
language.
2. Switch power OFF > ON.
Maintenance mode setup items
Refer to the following table.
Thank You For Using TheServiceManualShop.com
Maintenance Mode 1
Revision D
45