Head Rank Input - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.3 Head Rank input

Head rank is the characteristic of the head and each head has own value (QR code).
This value is used for determination of head drive voltage and temperature correction
in order to obtain a fine print quality.
Figure 5-37 showing input menu.
Item
Rank Input : QR code
SelecType
Item
Rank Input : Panel
SelecType
Figure 5-37.
Adjustment
Thank You For Using TheServiceManualShop.com
Press the [Enter] key to QR
code receive mode on line.
Press the [Enter] key to code
input mode with the panel.
Thank You For Using TheServiceManualShop.com
Self-Diagnostics
1. QR code input
Mode for the QR code input.
This head rank input way is for production line by a special bar
C A U T I O N
code reader.
For service, you should perform head rank input by panel input.
Figure 5-38 showing QR code input menu.
Wait
Finish the head movement
Input QR Code
Enter
Input value is valid
End with "Pause" key
Pause
Wait
Finish the head movement
Exc. Enter Fill
Enter
Please Set Ink
Enter
Ink Charge
Figure 5-38.
"Pause" key initiate the "Input QR Code" menu.
Input is ended when 3 head are input.
After the ink charge, it goes top menu of adjustment.
If the error condition is presented, retry it again from head 1 input.
Revision D
Input value is void
Error! Rank Input
Press the [Enter] key to [Rank input]
display, but pay attention because
rank is renewed.
Display when the cartridge is not set.
222