Removing Head Weight Set <Stylus Pro 10600 - Epson Stylus Pro 10000 Service Manual
Large format color inkjet printer
Hide thumbs
Also See for Stylus Pro 10000:
- User manual (174 pages) ,
- Printer manual (168 pages) ,
- Product support bulletin (104 pages)
Table of Contents
Advertisement
EPSON Stylus Pro 10000/10000CF/10600
4.3.3.4 Removing Head Weight Set <Stylus Pro 10600>
1.
Remove Carriage Cover. (Refer to 4.3.3.3 "Replacing the Printhead".)
2.
Remove R Side Cover. (Refer to 4.3.1.4 "R Side Cover Removal".)
3.
Remove L Side Cover. (Refer to 4.3.1.5 "L Side Cover Removal".)
4.
Remove R Inside Cover. (Refer to 4.3.1.6 "I/H Cover ASSY Removal".)
5.
Shift Carriage to right end. (Refer to Figure 4-93.)
Figure 4-93. Position for screw removal
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
6.
Insert a 30cm screwdriver through opening created by removal of R Inside Cover.
Remove 1 screw (W Sems M3x8) securing the weight to the Carriage.
Thank You For Using TheServiceManualShop.com
Disassembly
Insert a 30cm screwdriver
Remove this screw
Figure 4-94. Screws Securing Weight 1
Revision D
155
Advertisement
Table of Contents
Troubleshooting
