Epson Stylus Pro 10000 Service Manual page 159

EPSON Stylus Pro 10000/10000CF/10600
7. Disconnect all head cables (6 pieces) from the Head Board.
Head cable
Figure 4-84.
When connecting the FFC, firmly insert it directly in line. If the
C A U T I O N
connection fails due to angled insertion or insufficient insertion,
the following malfunctions could result.
1) Specified color will be emitted from all dots. (Poor contact.)
2) Specified color will not be emitted from all dots. (Blown
C362DRV Board fuse.)
When assembling, do not mistake the attachment location of the
C A U T I O N
tube and pipe.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
8. Remove one screw securing the Earth Plate. Do not drop the nut of the reverse
side.
Nut
9. Disconnect three connector cables, while push down the upper side of the Head
Board.
C A U T I O N
Thank You For Using TheServiceManualShop.com
Disassembly
Figure 4-85.
Figure 4-86.
To avoid danger of circuit board failure and loose connection of
FFC cable, hold the upper part of the Head circuit board when
disconnecting the connector.
Revision D
Screw
152