A13 Slant Adjustment - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.7 A13 slant adjustment

Print the test pattern and make sure the print quality by referencing the Figure 5-56.
If the slant condition is presented, perform the mechanical adjustment.
This test using A1 and A3 nozzle.
Figure 5-55 showing menu sequence.
Printing Pattern
Print END
Adjust the slant?
Enter
Wait
CR movement END
End with "Pause" key.
Pause
Wait
CR movement END
A13 Slant Check End
SelecType Item
Output Pattern
SelecType
Figure 5-55.
Adjustment
Thank You For Using TheServiceManualShop.com
Shift to "A13 Slant Check End"
menu by pressing "Pause" key.
Shift to "A123" or "A13" slant
check menu with following key
operation.
"Enter" key : A123 slant check.
"Pause" key : A13 slant check.
Shift to"A13" slant check menu with
"Pause" key.
Print out the pattern with "Enter"
key.
Thank You For Using TheServiceManualShop.com
<Print sample>
1. Check items: Black lines and Magenta lines are continue as same level by a
magnifying glass with scale.
2. Printing method.
One pass with Uni-D at 360dpi resolution for CR and 45dpi for PF.
K
Self-Diagnostics
When check the slant, regard the
joint department shown here.
K M K
M M
Figure 5-56.
Revision D
232