Adjustment Menu; Paper Skew - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.1 Adjustment menu

Following figure showing adjustment menu sequence.
Adj : Check Skew
Adj : Input Rank
Adj : Check Nozzle
Adj : Offset Adj
Adj : Det. Res.
Adj : Cutter
Adj : A13 Slant
Adj : A123 Slant
Adj : B123 Slant
Adj : Bi-d
Adj : Copy Param
Adj : Bi-d 2
Adj : Head_LR Adj.
Adj : Feed Adj.
Adj : Top & Bottom
Adj : Rear Sensor Pos.
Adj : Test Print
Adj : Clean Head
Adj : Counter Clear
Figure 5-35.
Adjustment
Thank You For Using TheServiceManualShop.com
Enter
Item

Paper skew

Pause
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Thank You For Using TheServiceManualShop.com
5.4.4.2 Paper Skew
Feed the paper and check the paper edge position with the P_Edge sensor, then
compare the difference between start position and stopped position. The result is
displayed on the LCD screen.
After paper initialization is complete, the paper feed amount is input and the paper left
edge (capping side) is detected by the edge sensor. Check the displayed error of the
forward paper feeding. If a feeding forward/rear paper recognition error or no paper at
rear sensor during feeding error occurs, the error is displayed, and this item can be
removed by key input.
Finish the skew test by depressing "Pause" key at standby state.
Figure 5-36 showing skew menu sequence.
Check Skew 1.0m
Enter
Exc. Skew
Skew Result : xxxx mm
The skew value is determined at the first edge detection at left side of paper.
Pull the paper release lever toward up when the "Paper Out" LED indicator is light
or blinking. (Above LED indication means paper detection error.)
Panel key operation is as follows:
Enter: Go to the "Adj: Input Rank" menu.
Pause: Go to the "Adj: Check Skew"
All keys are inactive during the skew check operation.
Self-Diagnostics
Select the proper value
with [Paper Feed+/-] key.
Figure 5-36.
Revision D
221