Epson Stylus Pro 10000 Service Manual page 348

EPSON Stylus Pro 10000/10000CF/10600
NVRAM counter value indication
Selecting this mode allows the user to indicate each life counter in decimal.
Adjustment / setup menu
This section explains the Adjustment/Setup Menu. The table below shows items that
can be adjusted/set up from this menu.
Table 8-27. Adjustment / setup menu
Adjustment / Setup Item
Paper feed adjustment conversion
system table 1
XX1=<nn>:<mm>
(Pigment, PH= 0.2mm ~ 0.5mm)
Paper feed adjustment conversion
system table 2 XX2=<nn>:<mm>
(pigment, PH= ~ 0.1mm)
Paper feed adjustment conversion
system table 3
XX3=<nn>:<mm>
(dye, PH= 0.2mm ~ 0.5mm)
Paper feed adjustment conversion
system table 4
XX4=<nn>:<mm>
(dye, PH= ~ 0.1mm)
Paper feed adjustment conversion
XX5=<nn>:<mm>
system table 5 (PH= 0.6mm ~ )
XXS=<mmmm1>
System table version
Failed nozzle limit (AY)
Failed nozzle limit (HC2)
Failed nozzle limit (HCD)
Failed Nozzle limit (PPI)
Ink cartridge type
CSIC detection level
Stylus Pro 10600
Thank You For Using TheServiceManualShop.com
Panel Display Adjustment / Setup Value
<nn> : 00H ~ C9H
<mm> : 00H ~ C9H, FFH
<nn> : 00H ~ C9H
<mm> : 00H ~ C9H, FFH
<nn> : 00H ~ C9H
<mm> : 00H ~ C9H, FFH
<nn> : 00H ~ C9H
<mm> : 00H ~ C9H, FFH
<nn> : 00H ~ C9H
<mm> : 00H ~ C9H, FFH
<mmmm1> : NVRAM version
<mm2> : conversion table change
<mm2>
history
0 ~ 2 ~ 45
NZL_AY
0 ~ 2 ~ 45
NZL_HC2
NZL_HCD 0 ~ 2 ~ 45
0 ~ 2 ~ 45
NZL_PPI
0, 1, 2, 3, 4
NPD
O, N, X
ED MODE
Thank You For Using TheServiceManualShop.com
Table 8-27. Adjustment / setup menu
Adjustment / Setup Item
PG setting
FLBL DET setting
CR speed adjustment for Bi-D print
on specific media *1
NOTE1: (*1) Only displayed when HC2/AY ink is set.
NOTE2: Underlines show default values for Adjustment/Setup items.
Each Adjustment/Setup item explained below.
Paper feed adjustment conversion system table
Paper feed adjustment converter system table is to initialize user table which can
be changed from maintenance mode 1. It normally does not involve with m2
parameter conversion of "Paper feed adjustment setup" in mechanical sequence
command. This table consist 5 type of tables.
Each table can be changed from this maintenance mode 2.
1. Conversion table for pigment printer, paper thickness setup command 0.2mm ~
0.5mm
2. Conversion table for pigment printer, paper thickness setup command 0.0mm ~
0.1mm
3. Conversion table for dye printer, paper thickness setup command 0.2mm ~ 0.5mm
4. Conversion table for dye printer, paper thickness setup command 0.0mm ~ 0.1mm
5. Conversion table for pigment/dye printer, paper thickness setup command 0.6mm
~ 1.6mm
Product Description
Revision D
Panel Display Adjustment / Setup Value
N, 3, 4
N34
ON, OFF
FLBL DET
285 ~ 290 ~ 310
CR SPEED
341