Epson Stylus Pro 10000 Service Manual page 234

EPSON Stylus Pro 10000/10000CF/10600
2-6. Pigment ink
Mode for the head selection of pigment ink code
Figure 5-45 showing head number selection menu sequence.
Item
Input Head 1 Code
SelecType
Item
Input Head 2 Code
SelecType
Item
Input Head 3 Code
SelecType
Figure 5-45.
Adjustment
Thank You For Using TheServiceManualShop.com
Press the [Enter] key to select
the input mode of Head 1.
Press the [Enter] key to select
the input mode of Head 2.
Press the [Enter] key to select
the input mode of Head 3.
Thank You For Using TheServiceManualShop.com
Self-Diagnostics
2-7. Cord input for pigment
Mode for the head code input. Cursor is appeared under the input column.
Figure 5-46 showing menu sequence.
Head 1-3 X R \ \ \ \
Head 1-3 X R \ \ \ \
Head 1-3 X R \ \ \ \
Enter
End with "Pause" key.
Wait
Exc, Enter Fill
Enter
Please Set Ink
Enter
Ink Charge
Figure 5-46.
Move the cursor to the right with "SelecType" key.
Move the cursor to the left with "Item" key.
Cursor move to the left edge when you press the "SelecType" key at the right edge.
Cursor move to the right edge when you press the "Item" key at the left edge.
Revision D
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Press the [Enter] key to select
the Adjust top menu.
Press the [Enter] key to select
the Adjust top menu.
Press the [Enter] key to select
the Adjust top menu.
If the cartridge is not installed, left
hand of the message will appears.
227