Warning - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

3.2.3 Warning

"Warnings" take the place of LCD "READY" and "PRINTING" messages in order to notify the user of the condition. They do not have an influence on printer operation, and
printing can be continued. Warning messages are not cancelled until the cause of the warning is corrected. The following table shows types of warnings and cancellation methods.
No. LCD message
1 INK LOW
2 INK OUT
3 CLOSE INK CART. COVER
Maintenance call
4
MAINTENANCE REQ. 0100
MAINTENANCE REQ. 0101
5 NO INK CARTRIDGE
Troubleshooting
Thank You For Using TheServiceManualShop.com
Table 3-3. Warning message list
LED Indicators
Occurs when the printer has detected a software count End for one of the
ink cartridges. Software count Near-End is generated when the total dot
Ink Out LED Blink
number is counted by the software and the calculated amount of
(Corresponding color only)
remaining ink reaches less than 5%. Printing is possible for a short time,
but the ink cartridge should be replaced as soon as possible.
Occurs when printer has detected Ink End for an ink cartridge. Using the
ink in the printhead sub-tank, the printer will continue to print for
Ink Out LED On
(Corresponding color only) approximately B0 1 size page, but the ink cartridge should be replaced as
soon as possible.
Ink End LED's for all colors On Occurs when the ink cartridge cover opens during printing.
Paper Out LED On
(lights in 5 second intervals)
Ink Out LED On Occurs when the printer detects the absence of an ink cartridge during
printing due to being removed or for any other reason.
(Corresponding color only)
Thank You For Using TheServiceManualShop.com
Troubleshooting Using the Error Messages
Explanation
Refer to "3.3"
Revision D
Cancellation
Replace the ink cartridge
Replace the ink cartridge
Close the ink cartridge cover
Refer to "3.3"
Reset the ink cartridge
83