Epson Stylus Pro 10000 Service Manual page 344

EPSON Stylus Pro 10000/10000CF/10600
Ink cartridge information
It displays ink information recorded in CSIC.
Table 8-23. Ink Cartridge Information
Item Panel Display
Manufacture logo MANUFACT K ( ~ Y)
Ink color CRTG K ( ~ Y)
Ink type INK TYPE K ( ~ Y)
Ink capacity INK CAP K ( ~ Y)
Ink remaining INK LEFT-K ( ~ Y)
Product date PROD DATE K ( ~ Y)
Expire date EXPIRE DATE K ( ~ Y)
Ink life INK LEFT K ( ~ Y)
Ink age AGE K ( ~ Y)
Stylus Pro 10600
Thank You For Using TheServiceManualShop.com
Description
Indicates manufacturer information stored
in each ink cartridge CSIC.
Indicates ink color information stored in
each ink cartridge CSIC.
Indicates ink type information (pigment/
dye) stored in each ink cartridge CSIC.
Indicates ink capacity stored in ink
cartridge CSIC.
Indicates ink remaining for each ink
cartridge.
Indicates products date in format of
<YY>/<MM> stored in each ink cartridge
CSIC.
Indicates expire date stored in each ink
cartridge CSIC.
Indicates ink life after cartridge is opened
which is stored in each ink cartridge
CSIC.
Indicates passed time after cartridge is
opened for each ink cartridge.
Thank You For Using TheServiceManualShop.com
Product Description
SN menu
Paper feed adjustment table
m2 value set by mechanism sequence command "Paper feed adjustment" is converted
to the actual paper feed adjustment value with paper feed adjustment table saved in
NVRAM. (The conversion is valid when mechanism sequence command "Paper feed
adjustment mode = ON".)
NVRAM in the printer has following 5 sets of conversion table. Users can change each
table with this maintenance mode.
1. Conversion table for pigment, paper thickness setup command 0.2mm~0.5mm
2. Conversion table for pigment, paper thickness setup command 0.0mm~0.1mm
3. Conversion table for dye, paper thickness setup command 0.2mm~0.5mm
4. Conversion table for dye, paper thickness setup command 0.0mm~0.1mm
5. Conversion table for dye/pigment, paper thickness setup command less than
0.6mm~1.6mm
Change of paper feed adjustment table
<Format> "XXx=nn:mm"
• <mm> indicates conversion value of <nn> designated with mechanism
sequence command.
• Conversion tables are XX1 - XX5.
• When <mm> = FFh, applicable input value is not converted.
(When <mm> is FFH, the value designated with mechanism sequence
command and added 24H is used as adjustment value just for XX5)
<Operation>
• The cursor shifts between <nn> and <mm> with "Cleaning" button.
• The value pointed with the cursor increases/decreases with "Paper feed" +
or -] button.
• Setting value is saved into NVRAM with "Enter" button.
Revision D
337