Epson Stylus Pro 10000 Service Manual page 195

EPSON Stylus Pro 10000/10000CF/10600
Table 5-1. Repair Items and Required Adjustment Items
Adjustment
Repair Item
Procedure
CR timing belt tension adjustment
CR Motor 1
replacement <Start-up the Self-diagnostics>
Bi-d adjustment
2
Head slant adjustment
3
4 Clear the CR motor life counter.
PF timing belt tension adjustment
PF Motor 1
replacement <Start-up the Self-diagnostics>
Paper feed adjsutment
2
Top & Bottom adjustment
3
Clear the PF motor life counter.
4
<Sensor ASSY <Start-up the Self-diagnostics>
replacement 1>
1
Rear sensor volume adjustment
P_FRONT sensor
2 Front sensor volume adjustment
ASSY
Top & Bottom adjustment
3
P_REAR sensor
ASSY
<Sensor ASSY <Start-up the Self-diagnostics>
replacement 2>
1
Paper sensor adjustment
P_REAR sensor
2
Rear sensor position adjustment
ASSY
<Sensor ASSY <Start-up the Self-diagnostics>
replacement 3>
From the "Test" menu select "Sensor" and
1
P_THICK sensor
then check the "Paper Thickness"
ASSY
Required tool: Paper thickness gauge
<Sensor ASSY <Start-up the Self-diagnostics>
replacement 4>
Capping position adjustment
1
CR_HP sensor
ASSY
<Sensor ASSY <Start-up the Self-diagnostics>
replacement 5>
1
From the "Test" menu select "Sensor" and
Cover sensor ASSY
then check the "Cover"
Adjustment
Thank You For Using TheServiceManualShop.com
Adjustment Items Reference
5.3.1
5.4.4.10
5.4.4.7
5.4.4.8
5.4.4.9
Ch1-1.8
5.3.2
5.4.4.12
5.4.4.13
Ch1-1.8
5.3.8.1
5.3.8.1
5.4.4.13
5.3
5.4.4.14
5.4.3.4
5.3.6
5.4.3.4
Thank You For Using TheServiceManualShop.com
Adjustment Outline
NOTE: (*1) When it is possible to back up parameters from the C362DRV Board
before replacement, the parameters can be downloaded to the new
C362DRV Board and steps 4~9 and 13 will not be needed.
Revision D
188