June 2005
Syslog testing
Once you configure the syslog feature and save it to Flash, use the Syslog test
command to test the configuration. The 9150 system generates test syslog
messages. This allows you to verify the syslog configuration as well as the
syslog collector functionality on the syslog server(s).
Getting there
9150
Performing Syslog testing
To perform syslog testing:
From the Menu Bar, choose Tests → Syslog.
1
Result: A message displays, similar to the following:
2
Click on the OK button.
3
Examine the syslog server(s) to see if the test was successful.
Remote Gateway 9150 Installation and Administration Guide
→
Configuration Manager
Troubleshooting
365