Restoring The Configuration; Before You Begin - Nortel Remote Gateway 9150 Installation And Administration Manual

June 2005

Restoring the configuration

Restore the configuration to the Remote Gateway 9150 unit's Flash memory by
uploading a configuration text file from a PC on the same network as the
Remote Gateway 9150 unit. To do this, perform the upload over the IP network
using the TFTP protocol.

Before you begin

Before you can upload the configuration file to the Remote Gateway 9150 unit,
you must complete the following steps:
1 Start the TFTP server application.
2 Ensure that the TFTP base directory points to the location of the
configuration file.
Getting there
9150
Remote Gateway 9150 Installation and Administration Guide
→
Configuration Manager
Administration
285