Nortel Remote Gateway 9150 Installation And Administration Manual page 330

Administration
Caller Info Statistics field descriptions
The following table describes the statistics on the Caller Info Statistics screen:
Column
Connection ID
Remote ID
Current Media
Type
Priority
Call BW
Start Time
Transitions to PSTN
Transitions to IP
Last Transition to
PSTN
Last Transition to IP
302
Description
Identifies the sequential number of the call processed
by the remote unit in relation to all calls ever
processed by that unit.
Identifies the Unit ID of the remote site that was
involved in the call. Local calls on a Remote Gateway
9150 unit result in a 0 in this field.
Identifies whether the call took place over the PSTN or
IP network.
Identifies the type of call.
Valid values are Signaling, Voice, and Local.
Identifies the priority setting of the involved trunk.
Valid values are PSTN Only, IP Only, High, and
Normal.
Identifies the amount of bandwidth used by the call.
Identifies the time that the connection initiated.
Identifies the number of times the RLC moved the call
to the PSTN.
Identifies the number of times the RLC moved the call
to the IP network.
Identifies the last time the RLC moved the call from the
IP network to the PSTN.
Identifies the last time the RLC moved the call from the
PSTN to the IP network.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0