Nortel Remote Gateway 9150 Installation And Administration Manual page 259

June 2005
Field
PSTN Number
(B channel 1 and
B channel 2)
SPID (B channel 1
and B channel 2)
Remote Gateway 9150 Installation and Administration Guide
Description
Enter the full telephone number provided to you by your
ISDN service provider for this B-channel. Include access
codes, dialing prefix, and area code if necessary.
When entering the area code, always enter it directly
before the main telephone number. Do not use a
hyphen (-) as a separator because hyphens are reserved for
subaddressing.
The default is NC (Not Configured).
Enter the Service Profile Identifier (SPID) provided to you
by your ISDN service provider for this B-channel.
The default is NC (Not Configured).
Configuring the Remote Gateway 9150 unit
231