Display Logs - Nortel Remote Gateway 9150 Installation And Administration Manual

Display log definitions

Display logs

The display log functionality is significantly improved over prior releases of
Remote Gateway 9150. This appendix lists the 9150 system's display log error
and status messages.
Statistic
LOG NUMBER
DESCRIPTION
SEVERITY
TASK
PRODUCT
CANCELLATION
ACTION TO BE TAKEN:
PARAMETERS
DISPLAYED TEXT
PRODUCES HOST PBX
ALARM AND ALERT
422
Definition
0
This is a description of the log that is being generated.
NORMAL, WARNING, MINOR, MAJOR, CRITICAL
(Assigns one of these levels to the Log.)
This is the task that originates the trap. This can be the full name or
an abbreviation. (For development use only.)
RLC, 9150, 911x (Lists all products that can generate this log.)
This is a cross-reference to another log number that is the
complement of the current log (for example, QOS Transition/
Recovery, Link Up/Down.) This consists of a LOG NUMBER and
send Log IDType.
If the Severity is higher than NORMAL, this normally contains
information that would help the end user correct the problem, if
possible (for example, a Configuration Change), or give them
information about where the user can go for help.
1) description of parameter 1
2) description of parameter 2
.
.
.
N) description of parameter N
This information describing the event that led to the occurrence of
this log appears in the Display Logs pop-up window.
This information indicates whether the host PBX produces an alarm
and alert.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0