Nortel Remote Gateway 9150 Installation And Administration Manual page 211

Nortel remote gateway 9150: user guide

Hide thumbs Also See for Remote Gateway 9150:

Table of Contents

Trunk support

Remote Gateway 9150 Installation and Administration Guide

Choose 56K if you know that your Remote Gateway 9150

unit is in a PSTN network that can only transport at 56

Choose 64K if you know that your Remote Gateway 9150

unit is in a PSTN network that can only transport at 64

Choose Dynamic if you know that your Remote Gateway

9150 unit is in a PSTN network that supports speeds that

vary from 64 Kbps to 56 Kbps. The Remote Gateway 9100

Series system dynamically adapts and downgrades a call to

56 Kbps if 64 Kbps is not available.

Note: You must configure the same BRI speed (such as

56K, 64K, or dynamic) on both the RLC and the Remote

Gateway 9150 unit.

The default is 64K.

Configuring the Remote Gateway 9150 unit