Adding Trunk Interface Modules; Maximum Configurations - Nortel Remote Gateway 9150 Installation And Administration Manual

June 2005

Adding trunk interface modules

Initially, the Remote Gateway 9150 unit ships with no trunks. As connection
needs change, you can add up to four ISDN BRI S/T or U trunk interface
modules.
To determine how many trunk interface modules you need to install, use the
"Remote Gateway 9150 System expansion worksheet" on page 385. For
instructions on installing or replacing existing trunk interface modules, refer to
"Installing trunk interface or DSP application modules" on page 93.

Maximum configurations

The following table identifies the maximum configurations for the Remote
Gateway 9150 solution:
Component
RLC connections
DSP application modules
ISDN BRI modules
ISDN BRI lines
Trunk groups
Digital telephones
Analog telephone or fax
machine
Remote Gateway 9150 Installation and Administration Guide
Planning for Remote Gateway 9150 unit installation
Maximum
1
Note: You must assign all users at the Remote
Gateway 9150 site to the same RLC.
3
4
4
Note: Each line is associated with one ISDN BRI
module and provides two B-channels.
10
32
1
73