Nortel Remote Gateway 9150 Installation And Administration Manual page 76

Planning for Remote Gateway 9150 unit installation
Remote Gateway 9150 Installation Checklist

❒
❒
❒
❒
❒
❒
48
Task
Install the software from the product
CD-ROM or the Nortel web site.
Configure the IP address, subnet mask,
and default gateway on the Remote
Gateway 9150 unit.
Configure the following items, as
required, to create the communication
paths between the Remote Gateway
9150 unit and the RLC:
IP network: RLC's IP address
PSTN:
— RLC's telephone number
— primary trunk
security level and, if required,
security identifier
PING the Remote Gateway 9150 unit
and ensure that it is recognized as a
device on the network.
Ensure that the Remote Gateway 9150
unit's connection information is
completed on the RLC.
Configure user stations with
appropriate calling permissions and
features.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0
Page 3 of 4
For details, refer to
"Installing the Configuration
Manager software" on page
113.
"Using the Configuration
Wizard to perform initial
configuration" on page 115.
"Using the Configuration
Wizard to perform initial
configuration" on page
115
"Security level
configuration" on page
200
"Testing the network
connections" on page 129.
the Reach Line Card
Installation and
Administration Guide
(NTP 555-8421-210).
"9150 port configuration" on
page 207.