Nortel Remote Gateway 9150 Installation And Administration Manual page 238

Configuring the Remote Gateway 9150 unit
Local Profile Configuration field descriptions
Field
CPND
DN
Phone Type
Add on Module
Type
Auto Hold
Paging
210
Description
Enter the Calling Party Name Display (CPND) for the user
assigned to the station.
The default is NC (Not Configured).
Enter the user's local extension number.
Note: If Auto DN Discovery is enabled on the RLC, then this field
is configured to be the same DN as the primary DN configured on
the host PBX for this station.
Select the telephone model type connected to the port.
Valid options are M2006, M2008, M2216, M2616, M2616CT,
M3110, M3310, M3820, M3901, M3902, M3903, M3904,
M3905, MCA, ATA, and Other.
The default is M2616.
Select the applicable Add on Module for the M3904 and M3905
telephones.
Valid options are Not Configured, KBA, and DBA.
The default is Not Configured.
Click on the Enable option button if active calls are to be
automatically put on hold when another call appearance key is
pressed.
Click on the Disable option button if active calls are to be
disconnected when another call appearance key is pressed.
The default is Enable.
Click on the Enable option button if this station is to be
allowed to announce pages.
Click on the Disable option button if this station is not to be
allowed to announce pages.
The default is Enable.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0