Configuring Trunk Groups - Nortel Remote Gateway 9150 Installation And Administration Manual

Configuring the Remote Gateway 9150 unit

Configuring trunk groups

To configure trunk groups:
1 Complete the fields as described in "Trunk Group Configuration field
descriptions" below.
2 Click on the OK button
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
3 Click on the Send button to update the Remote Gateway 9150 unit with the
new information.
Note: To save changes to the Remote Gateway 9150 unit's Flash memory,
select Upload
236
→
Save to Flash from the Menu Bar.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0