Conference; Call Forward; Paging - Nortel Remote Gateway 9150 Installation And Administration Manual

Using Remote Gateway 9150 stations

Conference

The Conference feature is supported for host-controlled calls only. You cannot
conference in someone who must be called through the local PSTN.
Placing a conference call
To place a conference call:
1 Press the Conference key.
Result: The active call is placed on hold and you hear a dial tone.
2 Dial the number of the party you want to conference in.
3 When the called party answers, press the Conference key again to
complete the conference.

Call Forward

Remote Gateway 9100 Series supports Call Forward for host-controlled calls.
When you enable DN Discovery, your Remote Gateway 9100 Series system
supports Call Forward for locally controlled calls, as well.

Paging

When you press a local call appearance key, and then dial the Paging SPRE
code, you can announce a page to all other stations at your site.
Note: You can disable Paging for any station.
276 Remote Gateway 9150 Installation and Administration Guide
Standard 4.0