Nortel Remote Gateway 9150 Installation And Administration Manual page 324

Administration
Trunk Connection Statistics field descriptions
The following table describes the statistics on the Trunk Connection Statistics
screen:
Statistic
Trunk Number
Status
Call Type
Remote ID
Called Number
Start Time
Close Time
Duration
296
Description
RLC - Identifies the Network Port number used for the
call.
The third pair of numbers (the third item in the triplet)
corresponds to the port on the RLC.
9150 - Identifies the ISDN BRI module and B-channel
used for the call.
911x - Identifies the only trunk available to the remote
unit with all zeroes.
Identifies the current status of the trunk.
Valid values are Active and Idle.
Identifies whether the call is a local call or a remote
signaling call.
Valid values are Local and Signaling.
Identifies the remote unit involved in the call.
Identifies the remote DN regardless of who initiated
the call.
Identifies the time that the last call on this trunk began.
Identifies the time that the last call on this trunk ended.
If the trunk is active, this statistic displays "NA".
Identifies the amount of time taken for the call.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0