Nortel Remote Gateway 9150 Installation And Administration Manual page 265

Nortel remote gateway 9150: user guide

Hide thumbs Also See for Remote Gateway 9150:

Table of Contents

Trunk Group Configuration field descriptions

Trunk Access Code

Local DNs to Alert: Not

Remote Gateway 9150 Installation and Administration Guide

Select a group number.

Valid options are 1 through 8.

The default is 1.

Click on the Enable option button to activate the trunk

Click on the Disable option button to deactivate the trunk

The default is Disable.

Enter the trunk access code that you want to assign to the

trunk group, or accept the default.

Note: The trunk access code is automatically prefixed with a

pound sign (#). This means users must dial the # before the

trunk access code when making an outgoing local call.

Maximum length: 1 to 3 digits in addition to the pound sign

The default is 61.

Ensure that the Not Configured check box is cleared if you

wish to have incoming calls ring only on specific stations.

Enter the applicable extensions in the fields below the check

box. You can enter up to five extensions.

Note: You can create a private line by dedicating a trunk

group to one station only.

If you leave the fields blank, incoming calls received by this

trunk group rings on all telephones.

Configuring the Remote Gateway 9150 unit