Nortel Remote Gateway 9150 Installation And Administration Manual page 209

June 2005
Field
Enable PBX Alarms
SPRE Codes: Online
SPRE Codes: Paging
Remote Gateway 9150 Installation and Administration Guide
Description
Click on the Enable PBX Alarms check box if you want
the Remote Gateway 9150 unit to notify the host PBX to
produce alarms and alerts. If you don't want the Remote
Gateway 9150 unit to notify the host PBX to produce
alarms and alerts, ensure that the Enable PBX Alarms
check box is not selected.
Refer to "Display logs" on page 422 to determine which
alarms and alerts the PBX generates.
Enter the SPRE code that is to be used to put your site into
online mode, or accept the default code. The default code
is #99.
Note: The SPRE code is automatically prefixed with the
pound sign (#). This means users must dial # before the
SPRE code when going into online mode.
Maximum length: 3 digits in addition to the pound sign
Refer to "Online/offline table" on page 40 for more
information.
Enter the SPRE code that is used to announce pages to
other stations in your office, or accept the default code.
The default is #05.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when initiating a page.
Maximum length: 3 digits in addition to the pound sign
Configuring the Remote Gateway 9150 unit
181