Nortel Remote Gateway 9150 Installation And Administration Manual page 508

Display log definitions
Statistic
LOG NUMBER
DESCRIPTION
SEVERITY
TASK
PRODUCT
CANCELLATION
ACTION TO BE TAKEN
PARAMETERS
DISPLAYED TEXT
480
Definition
82
This log indicates that Network Manager task states for a particular
remote unit was reset and all the connections to the remote were
cleared. This can happen due to the following reasons:
1) An error occurred in the system to automatically trigger Network
Manager reset.
2) The user has issued a debug command "nmr x" where x is a
valid remote unit number.
MAJOR
Network Manager
RLC, 9150, 911x
None
System usually works as normal after the log is displayed. If not,
contact technical support personal for help. If the log is displayed
too frequently, check if anyone is entering debug commands. If not,
contact technical support.
1) Remote unit
States reset in NM for Remote: P1
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0