Mounting The Junos Pulse Gateway On Four Posts In A Rack Or Cabinet; Cabinet - Juniper Junos Pulse MAG2600 Hardware Manual

Mounting the Junos Pulse Gateway on Four Posts in a Rack or Cabinet

Copyright © 2014, Juniper Networks, Inc.
You can mount a Junos Pulse Gateway on four posts of a 19-in. rack or cabinet by using
the supplied rack-mount kit. (The remainder of this topic uses "rack" to mean "rack or

cabinet.")

NOTE: If you are mounting the Junos Pulse Gateway on four posts, ensure
that the rack is 21.5-in. through 31.5-in. deep if you will mount the Junos Pulse
Gateway flush with the rack front and that the rack is 23.5-in. through 32.5-in.
deep if you will mount the Junos Pulse Gateway recessed 2-in. from the rack
front, thus ensuring that the protective earthing terminal is accessible through
the opening in the rear bracket.
Before mounting the Junos Pulse Gateway on four posts in a rack:
Verify that the site meets the requirements.
Place the rack in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read the Security Products Safety Guide located on the Juniper Networks website.
Attach the mounting hardware to your Junos Pulse Gateway.
Chapter 9: Installing the Junos Pulse Gateway
65