Contacting Customer Support to Obtain Return Materials Authorization for the Junos
Pulse Gateway
Contacting Customer Support
Packing the Junos Pulse Gateway or a Component for Shipment
Copyright © 2014, Juniper Networks, Inc.
When requesting support from JTAC by telephone, be prepared to provide the following
information:
Your existing case number, if you have one
Details of the failure or problem
Type of activity being performed on the Services Gateway when the problem occurred
Configuration data displayed by one or more
Your name, organization name, telephone number, fax number, and shipping address
After you have located the serial numbers of the device or component, you can return
the device or component for repair or replacement. For this, you need to contact Juniper
Networks Technical Assistance Center (JTAC).
You can contact JTAC 24 hours a day, 7 days a week, using any of the following methods:
On the Web: Using the Case Manager link at
By telephone:
From the US and Canada: 1-888-314-JTAC
From all other locations: 1-408-745-9500
NOTE:
If you are contacting JTAC by telephone, enter your 11-digit case
number followed by the pound (#) key if this is an existing case, or press the
star (*) key to be routed to the next available support engineer.
To remove components from the Junos Pulse Gateway or to remove the Junos Pulse
Gateway from a rack, you need the following tools and parts:
Flat-blade (–) screwdriver
7/16-in. (11-mm) nut driver
Blank panels to cover empty slots
Electrostatic bag or antistatic mat, for each component
Electrostatic discharge (ESD) grounding wrist strap
Mechanical lift, if available
Phillips (+) screwdrivers, numbers 1 and 2
Chapter 15: Returning the Junos Pulse Gateway or Components
commands
show
http://www.juniper.net/support/
107