Figure 37: Removing Mag2600 Mounting Tray Front Panel - Juniper Junos Pulse MAG2600 Hardware Manual

Copyright © 2014, Juniper Networks, Inc.
To install a MAG2600 in the MAG-RK1U4mounting tray:
Loosen the two thumbscrews and remove the front panel from the MAG-RK1U4
1.
mounting tray.

Figure 37: Removing MAG2600 Mounting Tray Front Panel

Loosen the thumbscrew and remove the power supply holder located directly behind
2.
the slot where you want to place the MAG2600.
Chapter 9: Installing the Junos Pulse Gateway
69