Table of Contents
Advertisement
CHAPTER 9
Installing the Junos Pulse Gateway
Installing the Junos Pulse Gateway in a Rack
Copyright © 2014, Juniper Networks, Inc.
Installing the Junos Pulse Gateway in a Rack on page 51
Using the MAG-RK1U Mounting Kit on page 52
Using the MAG-RK2U Mounting Kit on page 57
Using the MAG4610 Rack-Mounting Kit on page 60
Using the MAG-RK1U2 Mounting Kit on page 61
Using the Mid-Ear Mounts on page 63
Mounting the Junos Pulse Gateway in a Recessed Position in a Rack or
Cabinet on page 67
Installing the Junos Pulse Gateway MAG2600 on a Desk on page 67
Installing the MAG2600 in the MAG-RK1U4 Tray on page 67
The Junos Pulse Gateway is shipped in a cardboard carton that also contains an accessory
box.
NOTE:
The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
Store the shipping carton box and packing material in case you need to return
or move the device at a later time.
You can mount the MAG4610, MAG6610, or MAG6611 as follows:
On four posts in a 19-in. rack or cabinet by using the mounting brackets provided with
the Junos Pulse Gateway.
NOTE:
Due to the size and weight of the Junos Pulse Gateway, Juniper
Networks recommends that you four-post mount the chassis and not front
mount only.
51
- Quick Links:
- Junos Pulse Gateway Hardware Overview
Hide quick links:
Advertisement
Table of Contents
