Using The Mid-Ear Mounts; Figure 30: Securing The Side Of The Mounting Tray To The Mag4610; Figure 31: Securing The Mounting Tray To The Rack - Juniper Junos Pulse MAG2600 Hardware Manual

Related
Documentation

Using the Mid-Ear Mounts

Copyright © 2014, Juniper Networks, Inc.

Figure 30: Securing the Side of the Mounting Tray to the MAG4610

To mount the MAG-RK1U2 in a rack or chassis, follow the instructions in
Junos Pulse Gateway on Four Posts in a Rack or Cabinet" on page
NOTE: The MAG-RK1U2 is a front-only mount. It does not require rear rails.
You must, however, use three screws on each mounting ear to ensure the
mounting tray does not sag. See
includes M5 and 10-32 Phillips round head screws that can be used if you do
not have any mounting screws.

Figure 31: Securing the Mounting Tray to the Rack

Mounting the Junos Pulse Gateway on Four Posts in a Rack or Cabinet on page 65
Using the MAG4610 Rack-Mounting Kit on page 60
The MAG-RK1U and MAG-RK2U mounting kits also contain mid-ear mounts. The mid-ear
mount package includes:
4 mid-ear mounts
8 silver medium length screws
Chapter 9: Installing the Junos Pulse Gateway
65.
Figure 31 on page 63. The MAG4610 rail kit
"Mounting the
63